Dayton 4E236C Instructions d'exploitation télécharger pdf

Operating Instructions & Parts Manual

Dayton Propane

Construction Heater

Description

Dayton propane construction heater is variable 223,000 to 375,000 BTU/Hr with a

built-in thermostat. This heater uses propane gas for combustion and electricity

to run the motor. It is primarily intended for temporary heating of buildings

under construction, alteration, or repair. This heater should only be used indoors

but never in occupied dwellings. Products of combustion are vented into

the area being heated.

Form 5S3163

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

4E236C

Version B - For Reduction G016.J

Figure 1 – Model 4E236C

1. Remove all packing items applied to

heater for shipment. Keep plastic

cover caps (attached to inlet connec-

tor and hose/regulator assembly) for

storage.

2. Remove all items from carton.

3. Check all items for shipping damage.

If heater is damaged, promptly

inform dealer where you bought

heater.

Unpacking

Fire, burn,

inhala-

tion, and explosion haz-

ard. Keep solid combus-

tibles such as building

materials, paper or card-

board, a safe distance

away from the heater as

recommended by the

instructions. Never use

the heater in spaces

which do or may contain

volatile or airborne com-

bustibles, or products

such as gasoline, sol-

vents, paint thinner, dust

particles, or unknown

chemicals.

Heater is designed and approved for use

as a construction heater under ANSI

Z83.7•CGA 2.14. The primary purpose of

construction heaters is to provide tempo-

rary heating of buildings under construc-

tion, alteration or repair, and to provide

temporary emergency heat. Properly used,

the heater provides safe economical

heating. Products of combustion are

vented into the area being heated.

We cannot foresee every use which may

be made of our heaters. Check with your

local fire safety authority if you have

questions about heater use.

Other standards govern the use of fuel

gases and heat producing products for

specific uses. Local authorities can advise

you about these.

Failure to comply with

the precautions and in-

structions provided with

this heater can result in

death, serious bodily

injury, and property loss

or damage from hazards

of fire, explosion, burn,

asphyxiation, carbon

monoxide poisoning,

and/or electrical shock.

Only persons who can

understand and follow

instructions should use or

service this heater.

If you need assistance or

heater information such

as an instructions

manual, labels, etc. con-

tact the manufacturer.

Not for

home or

recreational vehicle use.

GENERAL HAZARD

WARNING

Printed in U.S.A.

03430

0502/080/VCPVP

104799-01

Rev. D

05/02

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - Construction Heater

Operating Instructions & Parts ManualDayton PropaneConstruction HeaterDescriptionDayton propane construction heater is variable 223,000 to 375,000

Page 2

Dayton Operating Instructions and Parts Manual10Dayton PropaneConstruction Heater®4E236CAccessories*15 ft. Hose (Note: Only use one extra hose per hea

Page 3

Dayton Operating Instructions and Parts Manual11Model 4E236CVersion B - For Reduction G016.J®GreenBlackWhiteThermal SwitchBlueMotorLineGroundNeutralW

Page 4

Dayton Operating Instructions and Parts Manual4E236CManufactured for Dayton Electric Mfg. Co.Niles, Illinois 60714 U.S.A.Version B - For Reduction G

Page 5

Dayton Operating Instructions and Parts Manual2Dayton PropaneConstruction Heater®4E236CGeneral Safety InformationIMPORTANT: Make certain you readand u

Page 6

Dayton Operating Instructions and Parts Manual3Model 4E236CVersion B - For Reduction G016.J®Carbon monoxidepoisoning: Somepeople are more affected by

Page 7

Dayton Operating Instructions and Parts Manual4Dayton PropaneConstruction Heater®4E236CPropane gas and propane tank(s) areto be furnished by the user.

Page 8

Dayton Operating Instructions and Parts Manual5Model 4E236CVersion B - For Reduction G016.J®InstallationReview and under-stand the warningsin the Saf

Page 9

Dayton Operating Instructions and Parts Manual6Dayton PropaneConstruction Heater®4E236COperation (Continued)NOTE: Higher regulator setting willallow h

Page 10

Dayton Operating Instructions and Parts Manual7Model 4E236CVersion B - For Reduction G016.J®8. Turn motor and blade around andplace into shell backwa

Page 11 - Model 4E236C

Dayton Operating Instructions and Parts Manual8Dayton PropaneConstruction Heater®4E236CFigure 11 - Repair Parts IllustrationNOTE: Screws are standard

Page 12

Dayton Operating Instructions and Parts Manual9Model 4E236CVersion B - For Reduction G016.J®4E236CReference Part No. ForNumber Description Model 4E23

Commentaires sur ces manuels

Pas de commentaire

Dayton 4E236C Instructions d'exploitation

Naviguer en ligne ou télécharger Instructions d'exploitation pour Chauffe-eau et chaudières Dayton 4E236C. Dayton 4E236C Operating instructions Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Chauffe-eau et chaudières Dayton 4E236C